三面压缩高超进气道附面层抽吸研究

岳连捷; 叶青; 徐显坤; 陈立红; 张新宇

三面压缩高超进气道附面层抽吸研究

中国科学院力学研究所高温气体动力学重点实验室, 北京 100190

基金项目: 国家自然科学基金(90716014)

计量
- 文章访问数: 1538
- HTML浏览量: 1
- PDF量: 576
- 被引次数: 0
出版历程
- 收稿日期: 2011-03-08
- 修回日期: 2011-06-03
- 刊出日期: 2012-02-28

Boundary layer bleeding of three-dimensional compression hypersonic inlet

Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China

摘要

摘要: 针对超燃冲压发动机中,三面压缩进气道激波/附面层干扰诱发的隔离段流向涡现象,探索了不同的附面层抽吸方式对隔离段流向涡的影响.结合附面层油流图谱及数值模拟考察了相应附面层流态,并分析了不同抽吸工况下的抽吸流量及其对出口截面总压恢复与流向涡的影响.发现隔离段流向涡气流主要源于侧壁附面层分离,相比于再附区抽吸,分离区抽吸大幅度抑制了侧壁附面层的分离流动,从源头上控制了隔离段流向涡的形成,大幅削弱了流向涡尺度,提高了进气道总压恢复.同时,抽吸面积越大,流动品质的改善作用就越明显,但是也伴随着流量损失.
- 超燃冲压发动机 /
- 三面压缩进气道 /
- 附面层抽吸 /
- 表面油滴显示 /
- 流动形态 /
- 流向涡
Abstract: Various methods of boundary layer bleeding were investigated to control the streamwise vortices generated by shock/boundary layer interaction in the isolator of three-dimensional compression hypersonic scramjet inlet.The boundary layer flow patterns were visualized by oil dot technique and numerical simulation.And the effect of different bleedings on inlet performance was then analyzed.It was revealed that the streamwise vortices were mainly attributed to the boundary layer separation on the sidewall,and the bleeding on the sidewall separation is effective.Compared to the bleeding around the attachment line,the bleeding on the separation zone remarkably reduced the boundary layer separation and effectively diminished the development of the vortex structure,which ultimately contributed to higher total pressure recovery at the inlet exit.Moreover,the flow uniformity was improved as the bleeding area increasing,while at the cost of more mass loss.
- scramjet /
- three-dimensional compression inlet /
- boundary layer bleeding /
- oil dot flow visualization /
- flow pattern /
- streamwise vortex

HTML

参考文献(12)

[1]	Smart M K.Design of three-dimensional hypersonic inlets with rectangular-to-elliptical shape transition[J].Journal of Propulsion and Power,1999,15(3):408-416.
[2]	Holland S D,Perkins J N.Internal shock interactions in propulsion/airframe integrated three-dimensional sidewall compression scramjet inlets.AIAA 92-3099.1992.
[3]	金志光.超燃冲压发动机高超侧压式进气道设计方法研究.南京:南京航空航天大学,2006. JIN Zhiguang.Design methodology investigation of three-dimensional sidewall compression scramjet inlet.Nanjing:Nanjing University of Aeronautics and Astronautics,2006.(in Chinese)
[4]	Trexler C A.Performance of an inlet for an integrated scramjet concept [J].Journal of Aircraft,1974,11(9):589-591.
[5]	Trexler C A.Inlet performance of the integrated langley scramjet module (Mach 2.3 to 7.6).AIAA 75-1212,1975.
[6]	龚鹏.超燃冲压发动机三面压缩式进气道流场特性研究.北京:中国科学院力学研究所,2008. GONG Peng.Investigation of three-dimensional compression hypersonic inlet..Beijing:Institute of Mechanics,Chinese Academy of Sciences,2008.(in Chinese)
[7]	肖雅彬,岳连捷,龚鹏,等.三面压缩式高超声速进气道流动结构研究[J].实验流体力学,2008,22(2):64-67. XIAO Yabin,YUE Lianjie,GONG Peng,et al.Research on the flow pattern of three-dimensional compression hypersonic inlet[J].Journal of Experiments in Fluid Mechanics,2008,22(2):64-67.(in Chinese)
[8]	范晓樯,李桦,丁猛.三维超声速隔离段湍流内流场旋涡结构的数值模拟[J].国防科技大学报,2001,23(6):5-8. FAN Xiaoqiang,LI Hua,DING Meng.Numerical simulation of 3D turbulent vortex structures in isolator [J].Journal of National University of Defense Technology,2001,23(3):5-8.(in Chinese)
[9]	向安宇.超燃冲压发动机侧压式进气道流场特性研究.北京:中国科学院力学研究所,2006. XIANG Anyu.Investigation on sidewall compression scramjet inlet.Beijing:Institute of Mechanics,Chinese Academy of Sciences,2006.(in Chinese)
[10]	王卫星,袁化成,黄国平,等.抽吸位置对高超声速进气道起动性能的影响[J].航空动力学报,2009,24(4):918-924. WANG Weixing,YUAN Huacheng,HUANG Guoping,et al.Impact of suction position on starting of hypersonic inlet[J].Journal of Aerospace Power,2009,24(4):918-924.(in Chinese)
[11]	王世芬,王宇,刘鹏.高超音速后掠激波与边界层干扰流场特性[J],航空学报,1993,14(9):449-454. WANG Shifen,WANG Yu,LIU Peng.Surface feature in hypersonic swept-shock and boundary layer interaction[J].Acta Aeronautica et Astronautica Sinica,1993,14(9):449-454.(in Chinese)
[12]	Korkegi R H.Comparison of shock-induced two- and three-dimensional incipient turbulent separation [J].AIAA Journal,1975,13(4):534-535.