某民用大涵道比涡扇发动机风扇缩尺试验件气动性能数值仿真

朱芳; 陈云永; 卫飞飞; 金东海; 王延荣; 桂幸民

某民用大涵道比涡扇发动机风扇缩尺试验件气动性能数值仿真

1.
北京航空航天大学能源与动力工程学院, 北京 100191
2.
中航商用航空发动机有限责任公司压气机部, 上海 200135

基金项目: 国家自然科学基金(50736007,51006005,51236001)

计量
- 文章访问数: 1715
- HTML浏览量: 2
- PDF量: 1192
- 被引次数: 0
出版历程
- 收稿日期: 2013-03-19
- 刊出日期: 2013-07-28

Numerical simulation of aerodynamic performance of scaled fan of a civil high-bypass-ratio turbofan engine

1.
School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2.
Department of Compression Systems, Commercial Aircraft Engine Company Limited, Aviation Industry Corporation Shanghai 200135, China

摘要

摘要: 根据某民用航空发动机大涵道比风扇1/2缩尺试验任务的需求,利用三维数值模拟软件对该风扇缩尺试验件各个转速下的内、外涵气动性能进行了数值仿真分析,并对缩尺几何、弹性恢复角及涵道比等参数对风扇缩尺试验件内、外涵气动性能的影响进行了对比分析.结果表明:该风扇缩尺试验件各转速下的内、外涵性能都基本达到设计指标;几何缩尺分别引起了风扇外涵、内涵设计点的效率分别降低了1.26%,0.77%;80%转速下,叶尖弹性恢复角减小0.36°使风扇外涵稳定工作裕度扩展了4.04%,但近设计点总压比和效率均有所衰减;双涵道风扇在不同涵道比状态下,内、外涵相互影响,流量-总压比及流量-绝热效率特性是在一定范围内的曲线带.
- 大涵道比 /
- 风扇缩尺试验件 /
- 气动性能 /
- 弹性恢复角 /
- 数值模拟
Abstract: According to the testing demand for the half-scaled fan of a civil high-bypass-ratio turbofan engine,the aerodynamic performance of scaled fan was simulated using three-dimensional CFD software.The effects of geometry scale,elastic recovery angle and bypass-ratio on the performance of the fan were also analyzed.The numerical simulation results show that the design objectives for the scaled fan can be met basically under all kinds of corrected rotating speed.When the geometry of the fan was scaled down to the half,the adiabatic efficiency of the bypass and core passages decrease by 1.26% and 0.77%,respectively.Under 80% corrected rotating speed,0.36 degree reduction of the elastic recovery angle at fan tip could expand the stall margin by 4.04%,while the total pressure ratio and the adiabatic efficiency decreased at near design point.The total pressure ratio-mass flow characteristic and adiabatic efficiency-mass flow characteristic of the bypass and core passages for turbojet engine were represented a band of curves within a certain scope,under the bypass-ratio effect.
- high-bypass-ratio /
- scaled fan /
- aerodynamic performance /
- elastic recovery angle /
- numerical simulation

HTML

参考文献(16)

[1]	黄家骅,冯国泰.航空发动机特性仿真技术的进展与展望[J].推进技术,2002,23(4):346-351. HUANG Jiahua,FENG Guotai.Development and expectation of performance simulation in aviation engine[J].Journal of Propulsion Technology,2002,23(4):346-351.(in Chinese)
[2]	Dawes W N.The simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adap- tive unstructure mesh methodology [R].ASME paper 1991-GT-124,1991.
[3]	Denton J D.An improved time marching method for turbomachinery flow calculation[J].Journal of Engineering for Gas Turbines and Power,1983,105(7):514-521.
[4]	Denton J D.The calculation of fully three dimensional flow through any type of turbomachine blade row[R].AGARD LS 140,1985.
[5]	Hah C.Calculation of three-dimensional viscous flow in turbornachinery with an implicit relaxation method[J].Journal of Propulsion and Power,1987,3(5):415-422.
[6]	Hah C,Loellbach J.Development of hub corner stall and its influence on the performance of axial compressor blade rows[J].ASME Journal of Turbomachinery,1999,121(1):66-67.
[7]	Adamczyk J J.Model equation for simulation flows in multistage turbine [R].ASME Paper 1985-GT-152,1985.
[8]	Roberto B,Emesto B.Shock/boundary-layer/tip-clearance interaction in a transonic rotor blade[J].Journal of Propulsion and Power,2009,25(3):668-677.
[9]	宁方飞.考虑真实几何复杂性的跨声压气机内部流动的数值模拟 [D].北京:北京航空航天大学,2002. NING Fangfei.Numerical investigations of flows in tran-sonic compressors with real geometrical complexities [D].Beijing:Beijing University of Aeronautics and Astronau-tics,2002.(in Chinese)
[10]	李泯江.单转子叶尖间隙多块网格的跨声压气机数值模拟及设计研究 [D].北京:北京航空航天大学,2004. LI Minjiang.Numerical investigations and design of tran-sonic compressor with tip clearance flow using multi-block mesh [D].Beijing:Beijing University of Aeronautics and Astronautics,2004.(in Chinese)
[11]	尹松,金东海,朱芳,等.湍流模型对压气机数值模拟精度的影响[J].航空动力学报,2010,25(12):2683-2689. YIN Song,JIN Donghai,ZHU Fang,et al.Influence of turbulence models on simulation of a compressor[J].Journal of Aerospace Power,2010,25(12):2683-2689.(in Chinese)
[12]	李晓娟,桂幸民.风扇/增压级设计与非设计性能数值模拟术[J].推进技术,2005,26(6):522-525. LI Xiaojuan,GUI Xingmin.Numerical simulation of fan/compressor design and off-design performance[J].Journal of Propulsion Technology.2005,26(6):522-525.(in Chinese)
[13]	桂幸民,李晓娟.基于低雷诺数条件的风扇/增压级气动设计[J].燃气涡轮试验与研究,2007,20(3):18-22. GUI Xingmin,LI Xiaojuan.Aerodynamic design of fan/compressor operated at low Reynolds number [J].Gas-Turbine Experiment and Research,2007,20(3):18-22.(in Chinese)
[14]	冀国锋.轴流/离心压气机通用叶片造型设计系统及应用. [D].北京:北京航空航天大学,2009. JI Guofeng.A general blading design system and its application for axial/centrifugal compressor [D].Beijing:Beijing University of Aeronautics and Astronautics,2009.(in Chinese).
[15]	金东海,桂幸民.某涡扇发动机多级高负荷风扇/压气机气动性能数值模拟[J].航空动力学报,2011,26(5):1059-1065. JIN Donghai,GUI Xingmin.Numerical simulation of highly loaded multi-stage fan/compressor of a turbofan engine[J].Journal of Aerospace Power,2011,26(5):1059-1065.(in Chinese)
[16]	陈葆实.大涵道比风扇和增压级气动设计难点分析 [R].广东深圳:大型飞机关键技术高层论坛暨中国航空学会2007年学术年会,2007.