调整参数误差对齿面接触质量的影响

唐进元; 卢延峰; 周超

调整参数误差对齿面接触质量的影响

中南大学现代复杂装备设计与极端制造教育部重点实验室, 机电工程学院, 长沙 410083

基金项目: 国家重点基础研究发展计划(973计划2005CB724100)

计量
- 文章访问数: 1368
- HTML浏览量: 5
- PDF量: 432
- 被引次数: 0
出版历程
- 收稿日期: 2007-08-09
- 修回日期: 2007-12-17
- 刊出日期: 2008-09-28

Effect of machine tool adjustment parameter errors on spiral bevel gears tooth contact quality

Key Laboratory of Moden Complex Equiment Design and Manufacturing, Minstry of Eduction, School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China

摘要

摘要: 从齿面接触分析(Toothcontactanalysis,TCA)内含的啮合信息分析机床调整参数误差对齿面接触质量的影响,研究机床调整参数误差与螺旋锥齿轮齿面接触分析之间的关联规律.以SGM(螺旋锥齿轮,大轮展成法,小轮变性法加工)调整卡加工的弧齿锥齿轮副为研究对象,分析得到各个调整参数误差引起的齿面接触质量的变化规律.在此基础上,确定对齿面接触质量有较大影响的机床调整参数.
- 齿面接触分析 /
- 机床调整参数误差 /
- 弧齿锥齿轮
Abstract: Based on the meshing information of the tooth contact analysis(TCA),the influence on the tooth contact quality caused by the machine tool adjustment parameter errors was studied.The effect law between the machine tool adjustment parameter errors and the spiral bevel gears tooth contact was researched.The researched object is a pair of spiral bevel gears processed by SGM(spiral bevel gears,generated,modified roll) adjustment card.The laws of the tooth contact quality caused by the machine tool adjustment parameter errors were obtained.Based on the results,the machine tool adjustment parameters which have great influence on the tooth contact quality are confirmed
- tooth contact analysis /
- machine tool adjustment parameter errors /
- spiral bevel gear

HTML

参考文献(7)

[1]	Falah B.Experimented and numerical investigation of the meshing cycle and contact ratio in spiral bevel gears[J].Mechanism and Machine Theory,1908,33(12):21-38.
[2]	方宗德.高速弧齿锥齿轮动态质量优化[J].航空学报,2001,22(1):15-18.FANG Zongde.Optimization of dynamic meshing behavior of high speed spiral bevel gears[J].Acta Aeronautica et Astronsutica Siniea,2001,22(1):15-18.(in Chinese)
[3]	邓效忠.高重合度弧齿锥齿轮的设计理论和实验研究[D].西安:西北工业大学,2002.DENG Xiaozhong.Design theory and experiment research on spiral bevel gears with high contact ratio[D].Xi'ans Northwestern Polytechnical University,2002.(in Chinese)
[4]	李丽霞.机床调整误差对弧齿锥齿轮大轮齿面形状影响规律的研究[J].机械传动,2006,30(4);13-16.LI Lixia.Study on the influence of adjustment error of machine tool to the surface of the spiral bevel gear[J].Mechanical Transmission,2006,30 (4):13-16.(in Chinese)
[5]	Simon V.Computer simulation of tooth contact analysis of mismatched spiral bevel gears[J].Mechanism and Machine Tbeory,2007,42(3):365-381.
[6]	曾韬.螺旋锥齿轮设计与加工[M].哈尔滨:哈尔滨工业大学,1989.ZENG Tao.Design and processing of the spiral bevel gear[M].Harbin:Harbin Institute of Technology.1989.(in Chinese)
[7]	郑昌启.弧齿锥齿轮和准双曲面齿轮[M].北京:机械工业出版社,1988.ZHENG Changqi.Spiral bevel gear and hypoid gear[M].Beijing:Mechanical Industry Publishing Company,1988.(in Chinese)