吸气式空气涡轮冲压发动机的过渡态性能
Transition state performance simulation of air-turbo-ramjet engine
-
摘要: 为计算吸气式空气涡轮冲压(air-turbo-ramjet,ATR)发动机过渡态性能,建立了ATR发动机过渡态模型.通过与传统涡喷发动机供油原则对比得到了ATR发动机供油应遵循的规律,计算得到了给定供油规律下的ATR发动机加减速性能.结果显示ATR发动机在供油规律选择上更加灵活,并能很好地满足喘振裕度的要求.根据ATR发动机自身特点,在补足低转速特性后,本模型可直接模拟ATR发动机起动过程.Abstract: In order to simulate the transition state performance of air-turbo-ramjet(ATR)engine,an ATR engine model was established.The ATR engine fuel feeding law and the acceleration/deceleration performance were obtained through comparing to the traditional turbojet fuel feeding principle.The result shows that the ATR engine is more flexible in the selection of fuel feeding law and would satisfy the requirement of surge margin better.The engine start process could be simulated by this model after adding low speed of rotation characteristic according to the charateristic of ATR engine.
-
Key words:
- air-turbo-ramjet(ATR)engine /
- transition state /
- engine module model /
- fuel supply law /
- surge margin
-
[1] Ostrander M J,Thomas M E.Air-turbo-rocket solid-propellant development and testing[R].AIAA-97-3258,1997. [2] Thomas M E,Bossard J A,Ostrander M J.Addressing emerging tactical missile propulsion challenges with the solid propellant air-turbo-rocket[R].AIAA 2000-3309,2000. [3] Balepin V V,Liston G W.The steam jet TM:Mach 6+turbine engine with inlet air conditionin[R].AIAA 2001-3238,2001. [4] Tanatsugu N,Sato T,Balepin V V,et al.Development study on ATREX engine[R].AIAA-96-4553,1996. [5] Mizobata K,Arai T,Sugiyama H.Conceptual feasibility of reusable launch vehicles based on the ATREX engine[R].AIAA-99-4829,1999. [6] Bossard J A,Christensen K L, Fedunet M H,et al.Return of the solid fuel gas generator ATR[R].AIAA-87-1997,1987. [7] Hartung L C,Karkow J M,Ordway W L,et al. Orbit-on-demand vehicle propelled by ATR/R engines[R].AIAA-86-1847,1986. [8] Lantz E.High specific impulse propulsion for trans atmospheric vehicles[R].AIAA-87-2051,1987. [9] 屠秋野,陈玉春,苏三买,等.固体推进剂吸气式涡轮火箭发动机的建模及特征研究[J].固体火箭技术,2006,29(5):317-319,345. TU Qiuye,CHEN Yuchun,SU Sanmai,et al.Study on modeling and features of solid propellant air-turbo-rocket[J].Journal of Solid Rocket Technology,2006,29(5):317-319,345.(in Chinese) [10] 陈湘,陈玉春,屠秋野,等.固体推进剂空气涡轮火箭发动机的非设计点性能研究[J].固体火箭技术,2008,31(5):445-448. CHEN Xiang,CHEN Yuchun,TU Qiuye,et al.Research on off-design performance of solid propellant air-turbo-rocket[J].Journal of Solid Rocket Technology,2008,31(5):445-448.(in Chinese) [11] 屠秋野,丁朝霞,陈玉春,等.固体推进剂吸气式涡轮火箭发动机的气动热力循环分析[J].固体火箭技术,2009,32(1):53-57. TU Qiuye,DING Chaoxia,CHEN Yuchun,et al.Thermodynamic cycle analysis on solid propellant air-turbo-rocket[J].Journal of Solid Rocket Technology,2009,32(1):53-57.(in Chinese) [12] Christensen K L.Vehicle performance optimization utilizing the air turbo-ramjet propulsion system:methodology development and applications[R].Missouri US:University of Missouri,1997. [13] Cumpsty N.Jet propulsion[M].England,UK:Cambridge University Press,2003. [14] 廉小纯,吴虎.航空燃气轮机原理[M].北京:国防工业出版社,2001. [15] Walsh P P,Fletcher P.Gas turbine performance[M].USA:Blackwell Publishing,2004.
点击查看大图
计量
- 文章访问数: 1704
- HTML浏览量: 1
- PDF量: 1534
- 被引次数: 0