Numerical simulation of single-stage transonic compressor with inlet distortion
-
摘要: 基于彻体力模型的基本思想,发展了一套能够反映进气畸变对风扇/压气机气动性能影响的三维数值计算程序CSAC.首先详细研究了彻体力模型的具体建模方法,然后发展了相应的三维数值计算程序.利用该程序针对某单级跨声速压气机在均匀进气下的流场进行了计算验证,计算结果与雷诺平均Navier-Stokes(RANS)计算吻合得很好,流场主要参数分布与相关实验数据也有很好的一致性.利用该程序分别计算分析了进口存在稳态周向总压畸变及周向总温畸变的全环三维畸变流场,结果表明:压气机进口畸变流场存在大尺度、强三维特征,将导致压气机总压比及稳定裕度下降.所有计算结果均显示该模型能够在降低对计算资源和工程经验依赖的同时,有效分析进气畸变对压气机特性的影响.Abstract: A three-dimensional numerical calculation code called CSAC based on body force model was developed and used to predict fan/compressor performance with inlet distortion. First, the modeling method to build body force model was studied. Then, a three-dimensional numerical calculation code was developed. A single-stage transonic compressor flow field with clean inlet was simulated with the code. The calculation results agreed well with the solutions of Reynolds-averaged Navier-Stokes(RANS) and experimental data. The compressor flow field with inlet steady circumferential total pressure distortion and circumferential total temperature distortion were simulated respectively with the code. The results showed that the flow field with inlet distortion in compressor had large scale and strong three-dimensional features, which led to the decrease of compressor total pressure ratio and stability margin. All results show that this model can effectively analyze the effect of inlet distortion on compressor while reducing the dependency on computational resources and engineering experience.
-
Key words:
- compressor /
- inlet distortion /
- body force model /
- source term /
- aerodynamic performance
-
[1] Longley J P,Greitzer E M.Inlet distortion effects in aircraft propulsion system integration[R].AGARD-LS-183,1992. [2] Unno M,Kodama H,Nozaki O,et al.Unsteady three-dimensional Navier-Stokes simulations of fan-OGV-strut-pylon interaction[R].International Symposium of Air Breathing Engine,ISABE-2001-1197,2001. [3] Mazzawy R S.Multiple segment parallel compressor model for circumferential flow distortion[J].Journal of Engineering for Power,1997,99(2):288-296. [4] Peaeson H,Mekenzie A. Wakes in axial compressors[J].Journal of the Royal Aeronautical Society,1959,63(3):42-47. [5] Hawthorne W R.Non-axisymmetric flow through annular actuator disks:inlet distortion problem[J].Journal of Engineering for Power,1978,100(4):604-617. [6] 胡骏.均匀与非均匀进气条件下多级轴流压气机性能计算-周向畸变的影响[J].航空动力学报,2000,15(3):229-232. HU Jun.Calculation of uniform and non-uniform inlet condition of multistage axial flow compressor performance-the circumferential distortion[J].Journal of Aerospace Power,2000,15(3):229-232.(in Chinese) [7] Xu L,Hynes T P,Denton J D.Towards long length scale unsteady modelling in turbomachines[J].Journal of Power and Energy,2003,217(1):75-82. [8] Xu L.Assessing viscous body forces for unsteady calculations[J].Journal of Turbomachinery,2003,125(3):425-432. [9] Hale A,O'Brien W.A three-dimensional turbine engine analysis compressor code(TEACC) for steady-state inlet distortion[J].Journal of Turbomachinery,1998,120(3):422-430. [10] Chima R V.A three-dimensional unsteady CFD model of compressor stability[R].ASME Paper GT-2006-90040,2006. [11] Gong Y,Tan C S,Gordon K A,et al.A computational model for short-wavelength stall inception and development in multi stage compressors[J].Journal of Turbomachinery,1999,121(4):726-734. [12] 安玉戈,刘火星.压气机进气畸变数值模拟技术研究[J].航空学报,2012,33(9):1624-1632. AN Yuge,LIU Huoxing.Numerical simulation of compressor with inlet distortion[J].Acta Aeronautica et Astronautica Sinica,2012,33(9):1624-1632.(in Chinese) [13] 郑宁,邹正平,徐力平.风扇进气畸变三维非定常数值模拟技术研究[J].航空动力学报,2007,22(1):60-65. ZHENG Ning,ZHOU Zhengping,XU Liping.3-D unsteady numerical simulation of fan/compressor with inlet distortion[J].Journal of Aerospace Power,2007,22(1):60-65.(in Chinese) [14] 许开富,乔渭阳,罗华玲.风扇/压气机稳定性三维模型的研究[J].推进技术,2008,29(3):344-348. XU Kaifu,QIAO Weiyang,LUO Hualing.A 3-D CFD analysis code of fan and compressor stability[J]. Journal of Propulsion Technology,2008,29(3):344-348.(in Chinese) [15] 时培杰,乔渭阳,魏佐君,等.畸变进气下压气机三维黏性数值计算模型[J].航空动力学报,2012,27(7):1472-1478. SHI Peijie,QIAO Weiyang,WEI Zuojun,et al.Investigation of three-dimensional viscous model for compressor with distortion inlet[J].Journal of Aerospace Power,2012,27(7):1472-1478.(in Chinese) [16] Hale A,Davis M,Sirbaugh J.A numerical simulation capability for analysis of aircraft inlet-engine compatibility[R].ASME Paper GT-2004-53473,2004. [17] Marble F E.Three-dimensional flow in turbomachines,aerodynamics of turbines and compressors[M].Princeton:Princeton University Press,1964. [18] Gong Y.A computational model for rotating stall and inlet distortions in multi-stage compressors[D].Cambridge:Massachusetts Institute of Technology,1998. [19] 胡骏,吴铁鹰,曹人靖.航空叶片机原理[M].北京:国防工业出版社,2006. [20] Reid L,Moore R D.Performance of a single stage axial-flow transonic compressor with rotor and stator aspect ratio of 1.19 and 1.26,respectively,and with design pressure ratio of 1.82[R].NASA Technical Paper 1338,1978.
点击查看大图
计量
- 文章访问数: 990
- HTML浏览量: 3
- PDF量: 444
- 被引次数: 0