槽道进气角和转折角对叶栅流场特性影响的研究

基金项目: 空军工程大学工程学院“优秀博士学位论文创新基金”(BC07006)

Research on effect of slot inlet angle and turning angle on the flow field characteristic of cascade

The Engineering Institute, Air Force Engineering University, Xi'an 710038, China

摘要: 数值模拟了槽道进气角和转折角对开槽叶栅流场特性的影响.结果表明,槽道出口射流可以吹除叶片吸力面尾缘附面层分离气流,改善叶栅性能;存在使叶栅性能提高最大的最佳槽道进气角,随槽道进气角增大,槽内气流将因槽道几何转折角增大而增加流动损失,从而减小气流出口速度,降低其作用效果;当槽道进气角较小时,由于槽道进出口两端静压差减小,槽道对气流的加速作用下降,射流的作用效果也将降低.
- 航空、航天推进系统 /
- 开槽叶栅 /
- 射流 /
- 附面层气流
Abstract: The effect of slot inlet angle and turning angle on flow field characteristic of cascade with slot was studied numerically.The result shows that slot outlet jet can blow off separation flow of boundary layer on the trailing edge of suction surface and enhance cascade performance.An optimal slot inlet angle exists,at which the cascade performance is best.When the slot inlet angle increases from the optimal point,the flow loss increases due to larger geometrical turning angle of the slot,which in turn leads to a lowered speed of slot outlet jet and consequently,its effect is reduced.When the slot inlet angle decreases from the optimal point,the accelerating effect of slot is reduced due to less differential static pressure,thus the effect of jet would also be reduced.
- aerospace propulsion system /
- cascade with slot /
- jet /
- boundary layer

[1]	张相毅,周敏,王如根,等.叶片压力面到吸力面射流对其气动特性的影响[J].空气动力学学报,2006,24(2):152-156.ZHANG Xiangyi,ZHOU Min,WANG Rugen,et al.Research on the effect of jet flow from pressure surface to suction surface on performance of blade[J].Acta Aerodynamica Sinica,2006,24(2):152-156.
[2]	王如根.梯状间隙对亚声速轴流压气机影响的实验和数值研究[D].西安:西北工业大学,2005.WANG Rugen.Test and numerical investigation of stepped tip gap effects on a subsonic axial-flow compressor rotor[D].Xi'an:Northwestern Polytechnical University,2005.
[3]	Volino R J.Separation control on low pressure turbine airfoils using synthetic vortex generator jets[J].ASME J.Turbomachinery,2003,125(4):765-777.
[4]	Tumin A,Ashpis D E.Transient growth theory prediction of optimal placing of passive and active flow control devices for separation delay in LPT airfoils[R].NASA TM-212228,2003.
[5]	王松涛,颜培刚,孙玺淼,等.涡轮叶栅冷气掺混数值模拟方法[J].航空动力学报,2003,18(4):558-562.WANG Songtao,YAN Peigang,SUN Ximiao,et al.Numerical method for coolant mixing in turbine cascade flow field[J].Journal of Aerospace Power,2003,18(4):558-562.
[6]	Richard F,James C E.Comparison of typical national gas turbine establishment and NACA axial-flow compressor blade sections in cascade at low speed[R].NACA TN-3937,1957.