弯曲流道内二次流动的运动学分析和 数值可视化方法
Kinematic analysis and digital visualization of secondary flow in curved square passage
-
摘要: 通过运动学分析,得到了涡量与二次流之间的关系方程,介绍了弯曲流道内二次流结构的可视化方法.以截面法向涡量为基础,可求解得到与涡量对应的二次流速度场.该方法具有以下几个特点:从运动学求解得到的涡量与二次流流函数之间的方程,直接体现了二次流作为涡的特性,且作为分析流动结构的后处理方法,能够量化地求解出二次流速度以及分布情况.该方法消除了位势流的影响,使二次流显示更加真实清晰,这种方法比速度矢量图法更加准确完善.Abstract: The equation between secondary flow and vorticity was established through kinematic analysis.One method of digital visualization for secondary flow in curved passage was presented.Secondary flow velocity can be obtained from cross section normal vorticity.Some advantages of this method are below:the equation describes secondary flow as vortices.The influence of potential flow is eliminated.Quantizing secondary flow field can be figured out.More complicated secondary structure is observed.The visualization is more accurate than representation of velocity vector,and doesn ’t depend on the normal direction of cross section.
-
Key words:
- secondary flow /
- vorticity /
- kinematic analysis /
- visualization /
-
[1] Langston L S,Nice M L,Hooper R M.Three-dimensional flow within a turbine cascade passage[J].ASME Journal of Engineering for Power,1977,99(1):21-28. [2] Langston L S.Crossflows in a turbine cascade passage[J].ASME Journal of Engineering and Power,1980,102(5):866-874. [3] Sieverding C H.Recent progress in the understanding of basic aspects of secondary flows in turbine blade passages[J].ASME Journal of Engineering for Gas Turbines and Power,1985,107(2):248-257. [4] Sharma O P,Butler T L.Predictions of endwall losses and secondary flows in axial flow turbine cascades[J].ASME Journal of Turbomachinery,1987,109(2):229-236. [5] Goldstein R J,Wang H P,Jabbari M Y.The influence of secondary flows near the endwall and boundary layer disturbance on convective transport from a turbine blade[J].ASME Journal of Turbomachinery,1995,117(4):657-665. [6] Wang H P,Olson S J,Goldstein R J,et al.Flow visualization in a linear turbine cascade of high performance turbine blades[J].ASME Journal of Turbomachinery,1997,119(1):1-8. [7] 王仲奇,冯国泰,王松涛,等.透平叶片中的二次流旋涡结构的研究[J].工程热物理学报,2002,23(5):553-556. WANG Zhongqi,FENG Guotai,WANG Songtao,et al.Study on secondary flow vortex structures in turbine blades[J].Journal of Engineering Thermophysics,2002,23(5):553-556.(in Chinese) [8] Langston L S.Research on cascade secondary and tip-leakage flows — periodicity and surface flow visualization .AGARD,Secondary Flows in Turbomachines,SEE N90-21009,1990. [9] Persico G,Gaetani P,Dossena V,et al.On the definition of the secondary flow in three-dimensional cascades[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2009,223(6):667-676. [10] Germain T,Nagel M,Baier R D.Visualisation and quantification of secondary flows:application to turbine bladings with 3D-endwalls //Proceedings of the 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows.Lyon,France: ,ISAIF8-0098,2008. [11] Horlock J H,Lakshminarayana B.Secondary flows:theory,experiment,and application in turbomachinery aerodynamics[J].Annual Review of Fluid Mechanics,1973,5(1):247-280. [12] Greitzer E M,Tan C S,Graf M B.Internal flow:concepts and applications(Cambridge engine technology series)[M].Cambridge:Cambridge University Press,2004.
点击查看大图
计量
- 文章访问数: 1329
- HTML浏览量: 2
- PDF量: 387
- 被引次数: 0