带周向槽机匣处理的压气机内部流动数值模拟与试验

楚武利; 卢新根; 吴艳辉

带周向槽机匣处理的压气机内部流动数值模拟与试验

西北工业大学动力与能源学院, 陕西西安 710072

基金项目: 国家自然科学基金资助(50176042);航空科学基金资助(05C53016)

计量
- 文章访问数: 1709
- HTML浏览量: 4
- PDF量: 379
- 被引次数: 0
出版历程
- 收稿日期: 2005-03-29
- 修回日期: 2005-10-10
- 刊出日期: 2006-02-28

Numerical and Experimental Investigations of the Flow in a Compressor with Circumferential Grooves

School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China

摘要

摘要: 采用试验和数值模拟的方法研究了周向槽机匣处理对轴流压气机性能以及内部流场的影响。在单级轴流压气机试验台上对实壁机匣和周向槽机匣结构进行了详细的实验测试。同时,对每一种机匣结构的内部流场进行了全三维数值模拟,数值模拟结果与试验结果符合良好,相比于实壁机匣,试验以及数值模拟结果均表明周向槽机匣处理结构能够扩大压气机的稳定工作裕度,而对效率的影响不大。对内部流场的详细分析表明周向槽处理机匣对叶顶间隙泄漏涡形成和发展的抑制是周向槽机匣处理扩稳的主要原因。
- 航空、航天推进系统 /
- 轴流压气机 /
- 失速裕度 /
- 机匣处理 /
- 间隙泄漏涡
Abstract: Numerical and Experimental investigations were conducted to study the effect of circumferential grooves on the performance and flowfield of an axial-flow compressor rotor.A single-stage compressor rotor with no inlet guide vanes was tested under subsonic condition.Circumferential grooves as well as the original smooth wall configuration were analyzed to investigate the effects of circumferential grooves on compressor performance.The result shows that circumferential grooves are able to effectively extend the stall margin of the compressor with little influence on efficiency throughout the mass flow range tested.Steady-state Navier-Stokes analyses were performed to analyze flow structures associated with each casing treatment.The overall effects of circumferential grooves were correctly calculated with the numerical procedure.Detailed investigation of the calculated flow fields indicates that the key mechanism lay to the interaction with the tip leakage.Taking advantage of the existing pressure difference in the rotor blade row,circumferential grooves remove tip leakage flow in the high pressure zone and weaken or even destroy the structure of tip leakage vortex.At the same time the tip leakage reenters the main flow in the low pressure zones again and mixes with the main flow of the compressor,thus circumferential grooves influence the efficiency and stall margin of the compressor.
- aerospace propulsion system /
- axial flow compressor /
- stall margin /
- casing treatment /
- tip leakage vortex

HTML

参考文献(7)

[1]	Moore R D,et al.Effect of Casing Treatment on Overall and Blade Element Performance of a Compressor Rotor[R].NASA TN D-6538,1971.
[2]	Takata H,Tsakada Y.Stall Margin Improvement by Casing Treatment-Its Mechanism and Effectiveness[J].ASME Journal of Engineering for Power,1977,99 (1); 121 ～ 133.
[3]	Baily E E.Effects of Grooved Casing Treatment on the Flow Range Capability of a Single Stage Axial-Flow Compressor[R].NASA TM X-2459,1972.
[4]	刘志伟,张长生,黄建功.关于周向槽机匣处理的若干观测[J].西北工业大学学报,1985,13(1);207～217.Liu zhiwei,Zhang changsheng,Huang Jiangong.Some Observations on Circumferentially Grooved Casing Treatment[J].Journal of Northwestern Polytechnical University,1985,13(1) ;207～217.
[5]	Rabe D C,Hah C.Application of Casing Circumferential Grooves for Improved Stall Margin in aTransonic Axial Compressor[R].GT-2002-30641,2002.
[6]	Crook A J,Greitzer E M,Tan C S,Adamczyk J J.Numerical Simulation of Compressor Endwall and Casing Treatment Flow Phenomena[J].Journal of Turbomachinery,1993,115;501～512.
[7]	杜朝辉,姚吉先.带有机匣处理结构的叶栅流场数值计算[J].航空动力学报,1996,11(2);169～172.Du Chaohui,Yao Jixian.Numerical Investigation of Cascade Flowfield with Casing Treatment Configuration[J].Journal of Aerospace Power,1996,11(2); 169～ 172.